Advertisement
Attaching TheBlowerChute(IfEquipped)
•
Grasp blower chute with one hand and slide locking
rod on mounting bracket with other hand toward
engine. Use end of mounting bracket as leverage
when sliding the locking rod. See Figure 5.
•
Slip blower chute over rim of the discharge opening
and release locking rod to secure chute in place.
Make sure the safety switch button is fully
depressed by the front tab on the blower chute.
•
Raise the nozzle height to the highest setting when
using the blower chute. Refer to nozzle height
adjustment in the OPERATION section.
Blower
_Chute
Front
Tab
Figure5
SECTION 3: KNOW YOUR YARD VACUUM
Starter Handle
\
Handle
\
\
\
Handle
Vac Handle
Hose Assembly
Nozzle
Blower Chute
Figure6
Read this operator's manual and safety rules before
operating your Yard Vacuum. Compare the illustrations
in Figure 6 with your unit to familiarize yourself with the
location of various controls and adjustments.
Starter Handle
The starter handle is attached to the right upper handle.
Stand behind unit and pull the starter handle to start
engine.
WARNING:
The
operation
of any Yard
Vacuum
can
result
in foreign
objects
being thrown
into the eyes, which
can
result in severe eye damage. Always wear
safety glasses,
provided
with the Yard
Vacuum, for operating this equipment
or
while
performing
any
adjustments
or
Bag
Collects shredded material fed through the chipper
chute or vacuumed through the nozzle or hose.
Bag Handle
Used to grasp bag in order to assist in attaching,
removing, and emptying bag.
repairs on it.
Advertisement
