Aligning The Colors; To Align The Colors - Toshiba ColorStream TP50G60 Owner's Manual

I _GETTING STARTED
Aligning the colors
24
• This projection TV uses three separate TV tubes: a red one, a green one, and a blue one.
The red, green and blue images are projected onto the screen where they converge to
form a full color picture. You can see a clear picture only when they converge correctly.
• Your dealer should adjust the color convergence when your "IV is delivered. However,
convergence may drift over time or if you move the TV. If you can see clear images on
the screen, skip this procedure.
MENU </> v/^
f
UGHT RECALL
-- CABLE MUTE W/VIOEO TIMER
®®@
®®®
@®@
PLAY PiP
TOSHIBA
MENU
EXIT
ENTER
III
This adjustment should be made after the TV has been on for at least 30
minutes.
To check and align the colors
Press MENU, then press < or )- until
the PICTURE menu appears.
M qJl .
CONTRAST
BR I GHTNESS
COLOR 41---
TINT
SHARPNESS
W/_RE
Press • (or v)until "CONVERGENCE"
is highlighted.
FLESH TONE
3
Press 4 or • to display the
CONVERGENCE menu.
If alignment is correct, there will be one
vertical and one horizontal white line.
+
{'_ BLUE
PUSH
TO SELECT COLOR _J'O_
4
5
If you see separate colored lines, you
have to align the colors.
Press ENTER to select "RED" or "BLUE."
The selected mode is highlighted.
Press the "• (up)", " • (down)", "
(left)" and " • (right)" buttons to
converge the red or blue line into the
green line.
When color convergence is correctly
adjusted, you will see two single white
lines.
BLUE
PUSH
TO SELECT COLOR..__ _;_
+
RED
PUSH --_>^
TO SELECT COLOR .... = _>_
Press EXITto close the CONVERGENCE
menu.