Connecting Other Equipment; To Dub/Edit Video Tapes Using Two Vcrs - Toshiba ColorStream TP50G60 Owner's Manual

I _CONNECTING OTHER EQUIPMENT
Connecting External
Equipment
(continued,
To connect equipment for dubbing/editing
Connect the output jacks of the playback VCR to the input jacks (VIDEO 1, VIDEO 2 or VIDEO 3) on the "IV.
Connect the output jacks (VIDEO/AUDIO OUT) on the TV to the input jacks of the recording VCR.
Video Audio
output outputs
LFool', i\O J
Playback VCR
"IV rear
I I
VIDE01 VIDEO_ DVO
mouTmm
Note:
Do not connect one VCR to the output and input jacks on the TV at the same time.
Audio
inputs
Video
input
1-o I
t
Recording VCR
To monitor dubbing/editing
Turn on therV and both VCRs.
2
Press TV/VIDEO on the Remote Control (or ANT/
VIDEO on the TV) to select the input source of the
playback VCR.
Set the recording VCR to record mode and the
playback VCR to play.
You can view the video signal from the playback
VCR on the "IV screen while dubbing it onto the
recording VCR.
._,
52
CAUTION:
The unauthorized recording of television programs,
video tapes and other materials may infringe upon
the provisions of the copyright laws.
Notes:
• The input switch of the VCR is normplTy id the TV
position. Change the switch of the recording VCR to
the LINE or CAMERA position when using the video/
audio inputs of the VCR as above. Some VCRs
automatically switch when cables are plugged into the
video/audio inputs.
• The PIP picture cannot be output through the VIDEO
OUTPUT.