Toshiba ColorStream TP50G60 Owner's Manual page 2

Dear Customer ,vo __',_._
Welcome to the high quality picture world createdab_,,t_3_e^_OSHIBA Projection Color
Television.
This owner's manual applies to models._0_, TI:t65:G603and TP61G60.
This manual will help you use the rV's many exciti_andbseful features.
Before operating the FV,-please-__ alicl Operating instructions in this manual
thoroughly, and keep the manuaLfor-futu_°_fe'r_"_ I _ '
Customer's Record
You will find the model ttumber- a'n-d'_-e¥i_]'n-umber qn the back of the TV.
Record these numbers in thespaoesprovided-beloW_ _
Refer to them whenever you call upon your TOSHIBA dealer regarding this product.
Model Number
Serial Number
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
NE PASOUVRIR
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning symbol in the triangle
tells you that the voltage inside this
product may be strong enough to
cause an electric shock.
DO NOT TRY TO SERVICE THIS
PRODUCT YOURSELF.
The exclamation point in the triangle
tells you that important operating and
maintenance instructions follow this
symbol.
CAUTION:
As a safety feature, the AC plug has one prong wider than the other.
It will fit only one way into a standard electrical outlet.
If the plug will not fit into the outlet, try turning it around.
If the plug will not fit either way, the outlet is probably old and
non-standard. You will need to have a new outlet installed by
an electrician.
DO NOT CHANGE THE SAFETY FEATURE OF THE PLUG.
CAUTION: ....
TO PREV_ ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE FULLY INSERTED INTO THE OUTLET TO
PREVENT ANY EXPOSURE OF THE PRONGS OF THE POLARIZED PLUG.
NOTE TO CATV SYSTEM INSTALLERS IN THE USA:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
2