EVGA Z77 FTW Motherboard
Windows 7/Vista/XP
Driver Installation
1.
Insert the EVGA Z77 FTW installation CD for the motherboard included
in the kit.
2.
The CD will autorun, install the drivers and utilities listed on the install
screen. If the CD does not run, go to My Computer and click on the CD
to open.
This section provides the AMI POST Codes (Table 6) for the EVGA Z77 FTW
Motherboard during system boot up.
The POST Codes are displayed on the Debug LED readout located directly
onboard the motherboard.
This Debug LED will also display current CPU
temperatures after the system has fully booted
into the Operating System.
Table 6.
01
Power on. Reset type detection (soft/hard).
02
AP initialization before microcode loading
03
North Bridge initialization before microcode loading
04
South Bridge initialization before microcode loading
05
OEM initialization before microcode loading
06
Microcode loading
07
AP initialization after microcode loading
08
North Bridge initialization after microcode loading
09
South Bridge initialization after microcode loading
26
Appendix A. POST Codes
AMI POST Code
Debug LED with CPU
Temperature Monitor