EVGA Z77 FTW User Manual page 9

EVGA Z77 FTW Motherboard
1 – 1394A Firewire Bracket
Allows addition of firewire 1394A output by connecting to the
motherboard header.
2 – SATA II/3G Data Cables
Used to support the SATA protocol and each one connects a
single drive to the motherboard.
2 – SATA III/6G Data Cables
Used to support the SATAIII/6G high speed protocol and each
one connects a single drive to the motherboard.
1 - 3-way SLI Bridge
Bridges three (3) graphics cards together which allows for
3-way SLI.
1 - 2-way SLI Bridge
Bridges two (2) graphics cards together which allows for
2-way SLI.
1 - Installation CD
Contains drivers that are needed to setup the motherboard.
1 – User Manual
Contains Information needed to properly install and configure
your EVGA Motherboard.
9