OnChip PATA/SATA Device
Press
Enter
SATA Mode
LEGACY Mode Support
SATA 3.0 Storage Controlle
SATA Mode
This is allows you set the onboard Serial SATA mode.
IDE: Use the SATA hard disk drivers as Parallel ATA storage devices.
RAID: Create a RAID 0, 1, 10 and 5 configuration
AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
LEGACY Mode Support
This function allows the SATA controller to operate in LEGACY mode.
Selected Disabled if you install operating system that support Native mode.
SATA 3.0 Storage Controller
This function allows you to enable The Marvell SATA 3.0 Controller. The
options are Enabled and Disabled.
to display the OnChip PATA/SATA Device menu.
[IDE]
[Disabled]
[Enabled]