Table of Contents
Advertisement
Note:
Connecting a digital audiosystem •Some audio systems
may not be compatible
with D olby
Digital bitstream signals. Older audio systems that are
The TV's DIGITAL
AUDIO
OUT terminal
outputs
a
Dolby _* Digital
m%%
or 2-channel
down-mixed
PCM (pulse-code
modulation)
signal
for use with an
external
Dolby _ Digital
decoder
or other
external
audio
system
with
optical
audio
input.
You will need:
• optical
audio
cable (Use an optical
audio
cable that
has the larger
"TosLink'"
connector
and not the
smaller
"mini-optical"
connector.)
DolbyDigitaldecoderor
uther digital audio system
J
F_
I
TV upper back panel
.,DLGLT_AL
,
%_'
_
!
To control
the audio:
1
Turn
on the TV and the digital
audio
device.
2
Press _
on the remote
control
to open
the
SETUP
menu.
3
Press • or • to select AV connection
and press
@.
not compatible
with standard
optical
out signals may not
work properly,
creating
a high noise level that may
damage
speakers
or headphones.
THIS DAMAGE
IS
NOT COVERED
BY YOUR WARRANTX
• The DIGITAL
AUDIO OUT terminal
may not output some
digital audio
sources
because
of copy restrictions.
• The Dolby
Digital format is only available
when tuned to
a digital
RF channel.
Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
Connecting an audiosystem
This connection
allows
you to use external
speakers
with an external
analog
audio
amplifier
to adjust
the
sound
level.
You will need:
• standard
audio
cables
Analog audioamplifier
/_© _I©
0
4
Press • or • to select
Digital Audio Output,
and
thenpress
< or !_ to select
either
Auto or PC.M,,
(_
'Selecting
the optical
audio
output
format
on page 53).
To control
the audio:
1
Turn
on the TV and the stereo
amplifier.
5
Minimize
the sound
volume
from the TV's built-
in speakers
and control
the volume
level
using
the amplifier's
remote
control,
18
Hide quick links:
Advertisement
Table of Contents
