Turn Off The Display Beep - Thermador CIT304E Use And Care Instructions Manual

6, Touch the power key_ Confirmation tones will sound. The power limit has
been activated.
Deactivate the power limit The power limit on the cooktop can be deactivated.
1.
Proceed in the same way as with the activation.
2. Touch the programming area until the symbol _ lights up on each of the element
displays.
3. Touch the power key _. Confirmation tones will sound. The power limit will
have been deactivated.
Indicator lights
Problem Possible cause Advice/Way of rectifying it
You try to choose a heat setting for an element but You have exceeded Deactivate the Power - Management function.
cannot, the total power limit of Increase the cooktop's power limit.
the cooktop. Switch off or reduce the heat setting of the
elements that are working.
You try to activate the Powerboost function but You have exceeded Deactivate the Power - Management function.
cannot, the total power limit of Turn off the elements that are working.
the cooktop.
Turn off the display beep
The display beeps when a key is touched. This setting can be turned off:
Turn the cooktop on at the power key.
1.
Set all elements to temperature level 3.
2. Turn the elements off one after another, from right to left (see picture).
3, Touch the power key for at least 5 seconds. The display will beep to confirm the
change.
To turn the display beeps back on again, repeat the steps above.
17