Cooking Position Display; Residual Heat Indicator - Thermador CIT30XWBB Use And Care Manual

Cooking Position Display

When you place cookware on the cooking surface, the
indicator for the relevant cooking position will light up on
the touchscreen display.
Detected cooking position
The cookware on the cooking sur-
face has been detected. The cook-
ing position display lights up. Touch
the
position.
Selected cooking position
The indicated cooking position has
been selected. You can now set the
power level.
Cooking position switched on
The indicated cooking position has
been switched on. The selected
power level lights up in the display.
There is no cookware on the cooking position
The cookware has been removed
from the cooking position. The
selected power level is dimmed.
symbol to select the cooking
#
Other displays and symbols
The settings for the cooking position
cannot be configured.
Touch the display for more informa-
tion.
Possible causes:
Up to 5 items of cookware evenly
▯
distributed over the cooking sur-
face can be heated at the same
time.
The cookware is not suitable for
▯
use on an induction cooktop.
The appliance has exceeded its
▯
maximum power consumption.

Residual Heat Indicator

The cooktop has several residual heat indicators
warn you that one or more cooking positions is/are still
hot. One, two or all three bars of the indicator
up depending on how strong the residual heat is. Do not
touch the cooking surface while the indicators are still lit
or immediately after they have switched off.
When you switch off the cooktop the residual heat
indicators will remain lit for as long as the cooking
surface is still hot.
÷ to
will light
÷
13