Sony RDR-VX555 Operating Instructions Manual page 52

5
6
7
8
9
10
11
4
Press REC MODE repeatedly to select the
recording
mode.
The displuy changes on file TV screen as
follows:
HQ-'_ HSP -_ SP -"_ LSP
t
SLP -_- EP -*= LP -_- ESP
For details about the recording mode, see
page 46.
Press SYSTEM MENU while the recorder is
in stop mode.
Select "Setup," and press ENTER.
Select "Features," and press ENTER.
The "Features' selup appeurs.
Select"SynchroRecording," andpress
ENTER.
12
Select "to DVD," andpress ENTER.
Press SYSTEMMENUto turn off the menu.
Set the timer onthe connectedequipment
to the time youwant to record, and turn it
off.
Press SYNCHRO REC.
The SYNCHRO RE(-' indicator lights up on
the front panel and the recorder stands by l\_r
Synchro-Rec.
The recorder starts recording when a signal is
received from tile connected equipment.
When the connected equipment turns off, the
recording stops and tile recorder turns off.
To stop recording
Press • STOP twice.
To cancel a Synchro-Rec function
Press SYNCHRO RE(" be[k>re recording starts.
The SYNCHRO REC indicator on the recorder
turns off.
If you press SYNCHRO REC during Synchro-
Rec, tile recording stops, the SYNCHRO REC
indicator turns off, and the recorder turns off.
If the timer settings of a Synchro-Recording
and another timer recording overlap
Regardless of whether or not the program is a
Synchro=Rec program, the program that starts first
has priority. The recorder starts recording the
second program about ten seconds alter tile first
program has finished. If the end time of one
setting and the start time of another timer setting is
the same, the beginning of the program that starts
later will be cut.
7:00 8:00 9:00 I0:00
Program 1 I ]
i
Program 2 I
will be cut off
• The recorder starts rccoMing only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder ' s power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec fimction does not work with some
tu hers. For details, see the tu her' s operating
instructions.
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop after a fcx_
seconds.
52