Easysetup (Resettingthe Recorder) - Sony RDR-VX555 Operating Instructions Manual

Command Mode
Changes the command mode of this recorder if
other DVD equipment is assigned the same
command mode. Be sure to match the command
mode of tile supplied remote to the setting made
herc. For details, see "lf you have a Sony DVD
player or more than one So W DVD recorder" on
page 22.
DVD 1
Select this if the defmllt
command mode conflicts
with other DVD equipment.
DVD 2 Select this if the default
command mode conflicts
with other DVD equipment.
DVD 3 The def:lult command mode
of the recorder.
Factory Setting
Allows you to return the setup settings to their
default settings. Note that all of your previous
settings will be lost.
1 After step 3 on page 102, select "Factory
Setting," and press ENTER.
2 Select"Start," and press ENTER.
The setup settings return to their det_.mlt
settings.
3 Press ENTER when "Finish" appears.
The power automatically turns offand then on
again, and the recorder is rcset to the factory
settings.
When the "Easy Setup" display appears,
follow the instructions for Easy Setup
(page 23) from step 4.
EasySetup
(Resettingthe Recorder)
Select this to run tile Easy Selup program.
1
PressSYSTEMMENUwhile the recorderis
in stop mode.
2 Select "Setup," and press ENTER.
3 Select "Easy Setup," and press ENTER.
0_ Easy Setup 10:10 AM
Follow the guide to make initial settings
Before you start
Check that you have made al{ necessary connections
4
Select "Start," andpressENTER.
5 Follow the instructions for Easy Setup
(page23) fromstep5.
104