Sony KV-36HS510 Installation And Disassembly Instructions Manual page 38

Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
on your TV for the first time after hooking it up. If you do not want to
set up the channels at this time, you can do it later by selecting the
Auto Program option in the Channel Menu (see page 68).
The Auto Setupfeature doesnot apply for installations that usea cable box
for al| channelselection.
Using Auto Setup
1
Press POWER to turn on the TV.
2 Press TV
FUNCTION on
the remote control.
3 To continue running Auto Setup, press CH÷.To exit Auto Setup,
press CH-.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbeied channel is displayed.
To reset the T_/to factory settings
1
Press POW[R to turn on the TV.
2
Hold down RESET on the remote control.
3 Press TVPOWERon the TV, (The TV will turn itself off, then back
on.)
4 Release RESET.
38