Vcr And Cable Box - Sony KV-36HS510 Installation And Disassembly Instructions Manual

VCR and Cable Box
For best resultS,use this connectionif:
ZI Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not
scramble aU channels.
With thisconnection, y oucan useall the features of TwinView.FordetailsaboutTwin
View,see page46.
With this connection you can:
Use the TV remote control to change channels coming through
the cable box. (You must first program the remote control for
your specific cable box; see "Programming the Remote Control"
on page 43.)
Use the TV remote control to change channels coming directly
into the TV's VHF/UHF jack. (The TV's tuner provides a better
signal than the cable box.)
Record channels coming through the cable box and channels
coming directly into the TV.
To connect a VCRand cable box, you need:
A splitter, which is a small, inexpensive device that you can
purchase at your local electronics store.
DIGITALCABLEBOXUSERS:If you are connecting a digital cable
box, you will need a special bi÷directionalsplitter that is designed
to work with your digital cablebox. Contactyour cable provider for
details.
_ sing
S VIDEO jacks?
See page 21.
J Three coaxial cables.
One A/V cable or one S VIDEO cable with audio cables.
To connect the VCRand cable box
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the cable box's input jack.
4 Use a coaxial cable to connect the cable box's output jack to the
VCR's RF input jack.
5 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
6 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
24