Sony handycam DCR-HC28 Operating Manual page 70

Naistssasss ass pr÷sa[tisss {gsstiss÷_}
• The vide(> heads will wear after hmg use. lfyou
cmmot oblain a clegw image even alter using a
cleaning c*,ssettc (optkmal), it ndghl be because
lhe video heads are worn. Pleg,se contact your
Sony dealer or local authorized Sony service
I_lcilily to have tile vide(> heads replaced.
LCDscreen
• Do nol exert excessive pressure on tile LCD
screen, as il may cause damage.
• If your camcorder is used in a cold place, a
residual image may appegw on lhe LCD screen.
Tbis is not a malhmction.
• While using your camcorder, the back of the
LCD screen may heat 1113. This is nol a
malfunction.
N To clean the LCDscreen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
N Onadjustment oI theLCDscreen
(CALIBRATION)
The huttuus on the tuuch pauel may uot
work correctly. If this happens, follow the
procedure below. It is recommended you
connect your camcorder to tile wall outlet
using the supplied AC Adaptor during the
operation.
(_) Slide the POWER switch to OFF(CHG).
@ Eject the cassette from your camcorder,
then disconnect any connecting cables
except the AC Adaptor from your
camcorder.
(_) Slide the POWER switch repeatedly to turn
on Ihe PLAY/EDIT lamp while pressing
DISP/BATT INEO on your camcorder, and
keep pressing down DISP/BATT INFO fur
about 5 seconds.
(_) Touch the "x" displayed on the screen with
Ihe corner of the "Memory Stick" or the
like.
IX CALIB_rlOt_
x
x
The position of tile "x" changes. If you did
not press the right spot. start from step (g)
again.
• You cannol calibrale the LCD screen if il is
rotated.
Onhandling thecasing
• If lhe casing is soiled, clean tile camcorder body
with a soft cloth liglaly moistened wilh water,
and then wipe tile casing with _ldry soil cloth,
• Avoid the Ionowing lo avoid damage to lhe
finish.
Using chemicals such as lhinner, benzine.
alcohol, chemical cloths, repellem, inseclicide
and sunscreen.
Handling with above subslances on your
hands.
Leaving tile casing in contact with rubber or
vinyl objects lor a long period of time.
About c areandstorage ofthelens
• Wipe lhe surh,ce oI lhe lens clean with _lsoil
clolh ill the lonowing inslanccs:
When lhere am fingerprints on lhe lens
surl_Jce,
In hol or humid locations
When the lens is exposed 1o sally air such as
at the seaside.
• Store in a well-ventilaled location subject lo
little dirt or dust.
• To prevenl nlold, periodicany clean tile lens as
described above, It is reconmlended lhal you
operale
your camcorder aboul once a monlb to
keep il in
oplilnull/ slale
lor a long tinle,
7O