Dubbingsoundto A Recordedtape - Sony handycam DCR-HC28 Operating Manual

6
Touch [REC START] at the point
you want to start recording.
7
Stop recording.
Touch [_ (Slop/or IRE(? PAUSE].
8 Touch [7 RET.]-_
FT].
Dubbingsoundto a
recordedtape
You can add sound to a tape already
recorded in tile 12-bit mode (p. 46) without
erasing tile original sound.
Internal stereo
microphone
You can record audio by using the internal
stere() microphone.
• You cannol record additklnal audio:
When tile lape has been recorded in tile ] 6-bit
nlode (p. 46).
When the tape has been recorded in lhe LP
nlode.
W]len your calncorder is
connected via
an
i.LINK cable.
Wllen the lape has been recorded in 4CH MIC
nlode.
On blank seclions of the tape.
When the tape has been recorded in a TV
color system olher tb_ul thal of your
canlcorder (P. 64).
When file write-protect tab of lhe cassette is
set 1o SAVE (p. 65).
On sections recorded in HDV lormal.
• When you add sound, the picture will not be
oulput flom tile A/V OUT jack. Check tile
picture on file LCD screen or lhe viewfinder.
r23
=
==
Continued._
51