Sony handycam DCR-HC28 Operating Manual page 52

SubbisS ssusd ts a rsss_ded taps (gs_tisssd}
Insert a recorded cassette into your
camcorder beforehand.
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
Touch _ (Play/Pause) to play
back the tape, then touch it again
at the point where you want to
start recording the sound.
3
Touch _ -_ [PAGE3] -_ [A
DUB CTRL] --* [AUDIO DUB].
_, II appears.
_6omm E @ o:o
A OUB CT_L
4
Touch _ (Play) and start
playing back the audio you want
to record at the same time.
@ appears 'a hile recording the ne'_x
sound in stereo 2 (ST2) during tile
playback of the tape.
5
Touch _ (Stop) when you want
to stop recording.
To dub on other scenes, repeat step 2 to
select scenes, then touch [AUDIO
DUBI.
6
Touch [_ RET.] -+ F_7.
• You can only record additional audio over a
tape recorded on yollr canlcorder, Tile sound
may deteriorate when you dub audio on a tape
recorded on other calncorders (inchlding other
DCR-HC28 camcorders).
To check the recorded sound
(_) PhLvback Ihe tape on _qfich you have
recorded audio (p. 25).
(_) Touch [_ ---+ [PAGEI] --+ [MENUI.
(_) Select [] (VCR SET), then touch
[_ 1[_ to select [AUDIO MIX],
then touch [EXEC].
_ ST1 * ST2
(_) Touch [_ / [_ to adjusl the bahmce
of the original sound (STI) and the nex_
sound IST2L then touch [EXEC].
• Tim original sound (STI) is output at tile delault
setling.
• Audio balance adjustment returns to the delault
setting after 12 hours of turning the power off.
52