Specifications - Sony STR-DE845 Operating Instructions Manual

Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 110 watts
(STR-DE945) and 100 watts
(STR-DE845) per channel
minimum RMS power,
with no more than 0.09 %
total harmonic distortion
from 250 milliwatts to
rated output (USA model
only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz - 20 kHz, THD 0.09 c_)
STR-DE945: 110 W + 110 W
STR-DE845: 100 W + 100 W
ReferencePower Output
(8 ohms 1 kHz, THD 0.7 _7_)
STR-DE945: FRONT: n
110W +110W
CENTER_I: 110 W
REARII:
110W ÷ll0W
STR-DE845: FRONTII:
100W
+ 100W
CENTERn: 100 W
REARU:
100W +100W
Models of other area code
STR-DE845:
Rated Power Output at Stereo Mode
18 ohms 1 kHz, THD 0.7 _)
100W+ 100W _}
90 W + 9() W 3_
ReferencePower Output
(8 ohms 1 kHz, THD 0.7,7, )
FRON'FI_:
IOOW +lO0W
CENTERn: 100 W
REARn:
100 W + 100 W
(8 ohms 20 Hz - 20 kHz, THD 0.09 c7, )
FRONTI_:
95W +95W
CENTERn: 95 W
REARn:
95W +95W
(8 ohms I kHz, THD 10 c7c)
FRONTb:
135 W + 135 W
CENTERb: 135 W
REARn:
135 W + 135 W
1) Depending on the soulld field settings and
tile source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
AU, E 240 V AC, 50 Hz
CN, SP 230 V AC, 50 Hz
3) Measured under the following conditions:
Area code Power requirements
CN 220 V AC, 50 Hz
Frequency response
PHONO: RIAA
equalization curve
+0.5 dB
CD, TAPE, MD/DAT,
MD/TAPE, DVD/
LD, TV/SAT,
VIDEO 1,2, and
VIDEO 3:
10 Hz- 50 kHz
+0.5/-2 dB (with
sound field,
equalizer, and bass
boost bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 2.5 mV
impedance: 50
kilohms
S/N41:86 dB
(A, 2.5 mV_b
5.1CH INPUT, CD,
TAPE, MD/DAT,
MD/TAPE, DVD/
LD, TV/SAT, VIDEO
1, 2, and VIDEO 3:
Sensitivity: 150 mV
Impedance:
50 kilohms
S/N41:96 dB
(A, 150 mV s_)
4) INPUT SHORT
5) Weighted network, input levd
0.
=_
3
o
55