Using The Set Up Button - Sony STR-DE845 Operating Instructions Manual
Hide thumbs
Also See for STR-DE845:
- Service manual (78 pages) ,
- Training manual (61 pages) ,
- Dimensions (1 page)
Table of Contents
Advertisement
Adjustments
Using
the SET UP Button
0
e_
=r
.m
0
®
0
The SET UP button
allo'_vs
vo_a to make
the following
adjustments.
Selecting
the 5.1CH video
input
This parameter
lets you specify the video input to be used
with the audio signals from the 5.1CH INPUT jack.
The 5.1CH video input is set to DVD/LD
by default.
1
Press SET UP.
2
Press the cursor buttons (<
or >) to select
5.1CH V: .
3
Turn the jog dial to select the video input you
desire.
Adjusting
the Control
A1 II auto function
Turning
on the Control
A1 I] auto
function
parameter
lets
you
turn
Sony
components
connected
via Control
A1
cords
(see page
13) on automatically
when
you press
the
corresponding
function
button,
Auto
function
is set to ON by default.
1
Press SET UR
2
Press the cursor buttons (< or >) to select "AUTO
FUNCTION."
3
Turn thejog
dial to select "ON" or "OFF."
Setting
up the 2 way remote
(STR-DE945 only)
This receiver
is shipped
from the factory
with
tbe 2 way
remote
control
svstem
set to "ON".
Normany
you can use
the receiver
as is.
However,
if you want to use this receiver together
with
another component
that is also compatible
with the 2 way
remote control system, be sure to perform the following
operation
to limit response
to signals sent from the remote
controls.
To use with
the
TA-E900OES
Perform
the following
steps
to turn
OFF this unit's
2 way
remote
control
system.
Also, be sure the TA-E9000E$
is
turned
on when
using
this unit.
To use with other components
that have the I_
logo
Turn OFF the other component'_
2 way remote control
system. For details, refer to the operating
instructions
suppled
with your other components.
To use with Sony CD players CDP-CX260 or CDP-
CX88ES
Turn OFF the remote control adapter
switch on the
CDP-CX260 or CDP-CX88ES. For details, refer to the
operating
instructions
suppled
with the CDP-CX260
or
CDP-CX88ES.
Also when using several 2 way remote control system
components
together, be sure to place them close together
in order to enable proper remote operation.
1
Press SET UR
2
Press the cursor buttons (< or _>) to select "2 WAY
REMOTE",
3
Turn the jog dial to select "ON" or "OFF".
5O
Hide quick links:
Advertisement
Table of Contents
