Sony STR-DE845 Operating Instructions Manual page 10

Digital Component Hookups
,I-
o
o
_2
r-
O
3
"o
o
t.t
kn
Connect the digital output jacks of your MD or DAT deck
to the receiver's digital input jack and connect the digital
input jacks of your MD or DAT deck to the receiver's
digital output jack. These connections allow you to make
digital recordings of a CDs played back through your
DVD (or LD player) and satellite broadcasts.
Required cords
Opticaldigital cords(notsupplied)
Black _-:'
Audio cords (not supplied)
MD or OAT deck
OUT
IN
OUT
..... _ Black
When connecting a cord, be sure to r=latch tile color-coded pins tt_
the appropriate jacks oil the components.
White (L) White (L)
IN
@
Red (R) Red (R)
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• To make a digital recording from your CD player, connect the CD player's digital output directly to the digital input on your MD or DAT
deck. Refer to the instructions supplied with your CD player and MD or DAT deck for details.
• The DVD/LD IN OPTICAL and COAX jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies. The other
OIYFICAL jacks are compatible with 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
• It is not possible to record analog signals to TAPE and VIDEO with only digital connections. To record analog signals, make analog
connections. To record digital signals, make digital connections.
• Input signals with 96 kHz sampling frequencies to the DVD/LD IN OPTICAL or COAX jacks. Using other jacks may result in
intermittent sound.
10