Sony DVP-C670D Operating Instructions Manual page 39

Digital Cinema Sound Settings 0
You can enjoy 3D surround sounds while playing discs
including Dolby Digital, MPEG audio and DTS DVDs,
even if you only have 2 or 4 speakers. Select the surround
mode that best suits your speaker setup.
You can also experience virtual 3D surround sound effects
through your headphones.
Select "VIRTUAL 3D SURROUND" after pressing
DISPLAY. When you select any item except "OFF," the
"VIRTUAL 3D SURROUND" indicator lights up in green.
m 1
__ 12(27)
_ 18(34)
__ C 01:32:55
VES A
Indicator v
s_
DVD
• VIRTUAL 3D SURROUND
The default setting is underlined.
.OFF
Far 2 speaker setups
• VES TV
• VES A
• VES B
• VIRTUAL SEMI MULTI DIMENSION
Far 4 (or more) speaker setups
• NORMAL SURROUND
• ENHANCED SURROUND
• VIRTUAL REAR SHIFT
• VIRTUAL MULTI REAR
• VIRTUAL MULTI DIMENSION
When using headphones
• VIRTUAL SURROUND HEADPHONES
Select the desired item. For details on each item, see the
following explanation.
Notes
• If you connect only 2 front speakers, you can only use "VES
TV," "VES A," "VES B" or "VIRTUAL SEMI MULTI
DIMENSION." If you connect more speakers, we recommend
that you select an item other than those above.
• To enjoy the original Dolby Digital sound through the 5,1CH
OUTPUT connectors, correctly set each speaker position and
distance. For details on setting each speaker, see page 67.
For 2 speaker setups
When you connect only 2 front speakers, Virtual
Enhanced Surround lets you enjoy surround sound effects
by using 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left, R: right)
without using actual rear speakers. Select one of the
following modes:
VES TV, VES A, VES B, VIRTUAL SEMI MULTI
DIMENSION.
If the player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL) connector, the
surround effect will be heard only when you set "DOLBY
DIGITAL" to "D-PCM," "MPEG" to "PCM" and "DTS" to
"D-PCM" in "AUDIO SETUP."
OFF
Outputs all channel signals recorded on the disc. For
example, outputs 2-channel signals for the stereo sound of
a CD or the Dolby Digital, MPEG audio and DTS sounds
of the DVD. When you connect fewer than 6 speakers, the
player appropriately distributes the output signal for the
missing speaker to other speakers.
VES (Virtual Enhanced Surround) TV
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. This mode is effective when the
distance between the front L and R speakers is short, such
as built-in speakers on a stereo TV.
Dvl
JL_
..._.. _ _,_._ ...j
VES (Virtual Enhanced Surround) A
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are reproduced
as shown in the illustration below.
L R
[] []
il;CiJ
..'=ii:::. ...::!i_.,
€
I,
o
e.
€
,.=
o
1=
IF
o
€
39