Specifications - Sony DVP-C660 Operating Instructions Manual

Specifications
CL
E
i
e,k
6'
=
CDIDVD player
Laser Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequencyresponse
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(+1 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(+0.5 dB)
CD: 2 Hz to 20 kHz (-+0.5 dB)
Signal-to-noise ratio
More than 110 dB (AUDIO OUT connectors
only)
Harmonic distortion
Less than 0.003 %
Dynamicrange
More than 100 dB (DVD)
More than 97 dB (CD)
Wow arid flutter
Less than detected value
(+0.001% W PEAK)
Jack OutputJinput Load impedance
type level
AUDIO OLrr Phono 2 Vrms Over 10 kilohms
(1, 2) jacks (at 50 kilohms)
DIGITAL OUT Optical -I 8 dBm Wave Iengt!'.: 660 nm
(OPTICAL) output
connector
DIGITAL OUT Phono 0.5 Vp-p 75 ohms terminated
(COAXIAL) jack
VIDEO OUT Phono 1.0 Vp-p 75 ohms,
(1, 2) jack sync negative
S VIDEO OUT 4-pro Y: 1.0 Vp-p 75 ohms,
(1, 2) mini DIN sync negative
C: 0.286 Vp-p 75 ohms terminated
COMPONENT Phono Y: 1.0 Vp-p 75 ohms,
VIDEO OUT jacks sync negative
(Y, PB/B-Y,
PR/R-Y) Ps/B-Y,
PR/R-Y:
0.7 Vp-p 75 ohms
MEGA Mini jack -
CONTROL
AUDIO 1N Phono 2 Vrms 47 kilohms
jack
General
Power requirements
120 V AC, 60 Hz
Power consumption
14W
Dimensions(approx.)
430 x 95 x 410 mm
(17 x 3 3/4x 16 _/4in.) (w/h/d)
incl. projecting parts
Mass (approx.)
5.3 kg (12 lb 2 oz)
Operating temperature
41 °Fto 95 _F(5 °C to 35 °C)
Operating humidity
25 % to 80 _7c
Supplied accessories
See page 7.
* Thesignals_omAUDlOOUTconnectorsan, measured. Whenyou
play PCM sound tracks with a 96 kHz sampling frequency, the
output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are
converted to 48 kHz (salnpling frequency).
Design and specifications are subject to change without notice.
ENERGY STAR @ is a U.S. registered mark.
As an ENERGY STAR @ Partner, Sony Corporation has
determined that this product meets the ENERGY STAR @
guidelines for energy efficiency.
66