Setting Up The Tv Automatically - Sony Trinitron KV-37XBR48M Operating Instructions Manual

Using your New TV
Setting Up the TV
Automatically
The EASY SETUP GUIDE feature will allow
you to set the on-screen language and set all
receivable channels. The EASY SETUP GUIDE
screen will appear every time you turn on the
TV until you perform AUTO PROGRAM.
The EASY SETUP GUIDE feature does not appl V
for installations that use a cable box for all channel
selection.
You can also set up the TV manually. (see "Using
...._1,_ SET UP me::;:" on _a_,_,_ ,_ __,_1
Tips *'_°
• Perfor, z this function during the day, with the antem_a
and/or cable properly connected, to ensure that all available
channels will be broadcasting and receivable.
• After using EASY SETUP GUIDE you will still have the
option of adjusting any of the system settings, like erasing
channels, through the SET UP menu. (see "CHANNEL
SET UP" on page26)
Using the buttons on the top of the TV:
f !
TIMER STAND BYISTEREO
1 Press POWER to turn on the TV.
The EASY SETUP GUIDE screen appears.
POWER
n ENGLISH : [CN * ]
ESPANOL : [ CH - ]
FRAN_AIS : [ VOL * ]
AUTO SET UP : [ VOL-)
DEMO : [ TV / VJOEO ]
First please connect
the antenna
Press I SET UP I to exit.
Press CHANNEL + to select ENGLISH,
CHANNEL - to select LbY,_INUL, or
VOLUME + to select FRAN_AIS.
The screen will change to reflect your
choice.
- VOLUME + -CHANNEL +
I
ENGLISH : I CH + ] I
ESPAt_OL [CH-]
I
FRAN_AIS : [ VOL ÷ ]
AmIT_ A 14 _TF _ vnl -
DEMO :--- iTVTVlDEO] l
I
_rilrenne_? ....... 'a
Optima [ SET UP ] para
d
For a DEMO of functions and menus, press
TV/VIDEO.
3 Press VOLU_CIE- to con_ue.
- VOLUME +
AUTO PROGRAM
"AUTO PROGRAM" appears and the TV
starts scanning and presetting channels
automatically. When all the receivable
channels are stored, the lowest numbered
channel is displayed. If the TV receives
cable TV channels, CABLE is set to ON
automatically.
To perform AUTO SET UP again
• Press SET UP on top of the TV.
VOLUME + to select a language.
• Press VOLUME- to restore factory
settings ("CONTINUE TO AUTO
PROGRAM?" will appear on the screen.)
Press CHANNEL+ to execute or
CHANNEL- to exit.
• Press SET UP to exit.
Notes:
• Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
"AUX" does not appear next to the
channel number.
When you perform AUTO PROGRAM,
your CHANNEL FIX, TIMER, and
CHANNEL BLOCK settings will be
erased.
15
L'
i¢