Connecting An Audio System; Connecting An Av Receiver - Sony Trinitron KV-37XBR48M Operating Instructions Manual

Connecting an audio system
For more dynamic sound, connect your audio
system to your TV.
1 Using ATJDTOconnect_rs, connect AUDIO
OUT on your TV to one of the unused Line
inputs (e.g. Tape-2, AUX1, etc.) on your stereo
(White-AUDIO Left, Red-AUDIO Right).
2 Set },our stereo to the chosen
Line input
and use the AUDIO menu to set your
audio cmtput. (see "SPEAKER" and
"AUDIO OUT" on page 24)
Connecting an AV receiver
For greater control of all audio and video
equipment, connect your AV receiver.
1 Using AUDIO/VIDEO connectors, connect
VIDEO 1 IN on your TV to Monitor AUDIO
and VIDEO OUT on your AV receiver.
2 Using AUDIO/VIDEO connectors, connect
TV OUT on your TV to TV AUDIO and
VIDEO IN on your AV receiver.
Note:
° You may want to use CHANNEL FIX to
fix your TV's input to the AV receiver
(VIDEO 1). (see "CHANNEL SET UP" on
page 26)
Disconnect all power sources before making any connections.
(Rear of TV)
I _-oq_@)_lC_- .... -_o@_1 I I AUDIO-L (white) "noisu "lied"
input _ I
I i,o " CLHI i
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
' ]
VMC-810S/820S (not supplied)
1
(Rear of TV) _AV outputs
000
AV receiver
2 _V inputs
T
VMC-810S/820S (not supplied)