Sony BRAVIA KDL-52XBR3 Operating Instructions Manual page 47

Using the Menus
Others Auto Adjustment Select to automatically adjust the display position, Phase and Pitch
of the picture when the TV receives an input signal from the
connected PC. Note that Auto Adjustment may not work well with
certain input signals. In such cases, manually adjust the options
below.
Reset Resets the current settings to the default value.
Phase Adjust after Pitch to fine tune overall sharpness.
Pitch Adjnst uneven sharpness on screen.
f,_ For the PC Input Signal Reference Chart, see page 51:
Horizontal Center
Allows you to move the position of the picture left and right.
Press 44* and press @ to adjust.
Vertical Center
Allows you to move the position of the picture up and down.
Press 14. and press @ to adjust.
Wide Mode Normal Select to display in the original image size.
Full 1 Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Full 2 Select to enlarge the picture to fill the display area.
Power On
Select to automatically switch to the standby
Management
mode when there is no signal input for 30 seconds.
Off Select to turn off Power
Management.
:_ Power Management is not VESA-compliant.
2
47