Programming The Remote Control - Sony BRAVIA KDL-52XBR3 Operating Instructions Manual

Lcd digital color tv
Hide thumbs Also See for BRAVIA KDL-52XBR3:
Table of Contents

Advertisement

Basic Operations
Programming
the Remote Control
The remote control is preset to operate
Sony brand video equipment.
BD/DVD
101 (Sony Blu-ray Disc Player)
DVR/VCR
901 (Sony Dretun System)
SAT/CABLE
801 (Sony Satellite Receiver)
Follow tile steps below to program your TV's remote control to operate
non-
Sony video equiprnent.
Find the three-digit
code for your equipment
fiorn the
Manutacturer.'
Codes"
listed on page 26. If more than one code number
is listed, try
entering
fiorn the code listed first.
[]
Press and hold the _,
_R
or _
FUNCTION
button you want to
program
on the remote control and press the %
button sirnultaneously.
The selected FUNCTION button (BD/DVD,
DVR/VCR
or SAT/CABLE)
will flash.
[]
Enter the three-digit
manufacturer's
code number
using the (_)-(_)
buttons
while the FUNCTION button is lit. If the code is not entered
within
10 seconds,
you must start again fiom step 1.
[]
Press the (_ button while the FUNCTION button is lit.
When the programming
is correct, the selected FUNCTION button blinks
twice, and when not, blinks five times.
'/_ While _;
_c_:3_ and _E
buttons are labeled as such, you can still
program any of your connecte d equipment using any one of the buttons
regardless of the label. For example, _
button can be programmed to
operate your VCR. If you have a DVD/VCR combo that you want to
operate with your TV remote control, you can program with the _
or
_c_" or even the _*_1
but remember which button you have
programmed for your particular use.
To check if the code works
Aim your TV's remote control at the equipment,
and press tbe green
button. If you can turn tbe equipment
on and off by using tbe remote control,
then the programming
is complete.
If not, try the next code listed.
f,_ If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically goes
f,_ In some cases, you may not be ab!e to program your remote control to
operate other equipmen t. !n such cases, use the equipment's own
remote control.
e}
F,"
o
=
(n
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravia kdl-52xbr2

Table of Contents