Tv Controls - Sony BRAVIA KDL-52XBR3 Operating Instructions Manual

Basic Operations
TV Controls
,[]
STANDBY
?POWER
[] []
[] POWER Press to turn on and off the TV.
[] [] {_ Press to scan through channels. To scan quickly through channels, press and hold down either
CHANNEL +/- -/+. In the MENU screen, these buttons serve as up/down buttons.
[] [] [] Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
VOLUME +/-
[] -}- Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
TVNIDEO Inputs, then the input will not appear. For details, see page 43.
In the MENU screen, this button serves as coufirming the selection or setting.
[] MENU Press to display MENU with TV functions and settings (see "Overview of MENU" on page 31).
[]
PIG OFF/TIMER Lights up in green when Picture Off is activated. Lights lip in orange when the timer is set.
LED When the timer is set, this LED will remain lit eveu if the TV is turned oft'. For details, see
page 44.
[] STANDBY LED Lights up in red when your TV is in the PC standby mode. If the LED blinks in red
continuously, this may indicate the TV needs servicing (see contacting Sony information on
page 2).
[] POWER LED Lights up in green when the TV is turned ou.
[]
(IR) Infrared
Receives ]R signals from the remote control.
Receiver/Light Do not put anything near the sensor, as its flmctiou may be affected.
Sensor
[]
Speaker
Ontputs the audio signal.
_ The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.
3O