Troubleshooting - Sony Trinitron KV-27S42 Operating Instructions Manual

Color tv
Hide thumbs Also See for Trinitron KV-27S42:
Table of Contents

Advertisement

Troubleshooting
If you are having a problem with your TV, try the suggestions
below. If
the problem persists, 'contact your nearest Sony dealer.
Cannot operate
single tuner
PIP (KV-27S46)
No picture, no
sound
Poor or no
picture, good
sound
Good picture,
no sound
No color
Only snow
appears on the
screen
O
Make sure the VCR is connected
correctly (see page 4).
O
Check to see if the VCR is on.
O
Make sure your remote control is programmed
to
operate your VCR (see page 31).
O
Make sure the power cord is plugged
in.
O
If a red light is flashing
on the front of your TV for
more than a few minutes, call your local service center.
O
Check the TV/VIDEO
settings: when watching
TV, set
to TV; when watching
video equipment,
set to VIDEO
(page 19).
O
Make sure the batteries have been inserted correctly
into the remote control.
O
Check your PARENTAL CONTROL settings (pages
28-29).
O
Try another channel, it could be station trouble.
O
Adjust PICTURE in the VIDEO menu (page 19).
O
Adjust BRIGHTNESS in the VIDEO menu (page 19).
O
Check the antenna and/or
cable connections
(page 3).
O
Press _
so that MUTING disappears
from the
screen (page 13).
O
Check your AUDIO settings. Your TV may be set to
SAP (page 21 ).
Q
Adjust COLOR in the VIDEO menu (page 19).
O
Check the CABLE setting in the CHANNEL
SET UP
menu (page 24).
O
Check the antenna and/or
cable connections
(page 3).
O
Make sure the channel selected is currently
broadcasting.
O
Press the _
button on the remote control.
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents