C_Using The Channel Menu - Sony BRAVIA KDL-40SL140 Operating Instructions Manual

Favorites Lets you set up a list of up to eight of your favorite channels or inputs.
Press i1"/,!, to select the Add to
Favorites
option and press @ to add the current channel or
input to your Favorites list.
To select a favorite channel or input from the list, press i1"/,!, to go through the list and @ to
select.
• To exit press _.
FAVORITES
• To quickly access the Favorites list, press _ when there is no menu on the screen.
Cable On Select if you are receiving cable channels via cable TV provider.
Off Select if you are using an antenna.
Add Digital Channels Select to add digital channels without replacing the original channel list. Be sure to set Cable
setting to On or Off in
Channel
menu for the correct type of input signal you choose.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels (Digital and
Analog).
• Before starting Auto
Program,
be sure to select On or Off for the Cable option under
the Channel
menu. When it is On, the TV will search for cable channels; when it is Off,
the TV will search for over-the-air signals with an antenna connection.
• If you are using an A-B RF switch (not supplied) to switch between cable or antenna
connection, be sure to select the correct Cable option to On or Off in the Channel Menu.
1
Select Auto Program.
2
Select OK to start Auto Program. When Auto Program is done, select OK.
• IMPORTANT: You must perform
Auto Program
after cable or antenna is
connected. If you cancel Auto
Program
before completion, some channels may not
be available.
Show/Hide Channels Aiiows you to show or hide
channels that appear when you use
the cH +/- buttonl
1 Press il'/,!, to scroll through the channels until you find the channel you want to show or
hide.
2 Press @ to determine if the channel will he shown or hidden.
• To show or hide more channels, repeat steps 1-2.
Label Channels Allows you to assign labels to channel numbers.
1 Press i1"/,!,to scroll through the channel numbers. Then press @ to select the channel
number that you want to assign a label.
2 Press _,/*/i1"/,!, to move through the label characters (A-Z, 0-9) and press @ to select
it. To move to the next character press _,/*/i1"/,!,. Repeat to add up to 7 characters to the
label. Then select on screen to set it. To assign labels to more channels, repeat
steps 1-2.
• To delete a character select on screen.
• To have a space between characters select _ on screen.
Diagnostics Allows to confirm the current signal performance.
34