Self-diagnosis
function
This monitor is equipped with a self-diagnosis function, if them is
a problem with your monitor or computer(s), the screen will go
blank and the (_)(power) indicator will either light up green or
flash orange, if the _) (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard or moving the mouse.
(power)
indicator
If the (_ (power)
indicator
is green
1
Turn off the (_) (POWER) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the _ (POWER)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor's condition.
If the (_ (power) indicator is flashing
orange
Press the _ (power)
switch
twice to turn the monitor
off
and then on.
If the Q) (power)
indicator
lights up green, the monitor
is working
properly.
If the (_3 (powe O indicator
is still flashing,
there is a potential
monitor
failure.
Count the number
of seconds
between
orange
flashes
of the (_3 (poweO
indicator
and inform
your authorized
Sony dealer of the monitor's
condition.
Be sure to note the model
name and serial number
of your monitor.
Also note the make and
model
of your computer
and graphic
board.
20