Security Authentication; To Deactivate The Security Lock; Self-Diagnosis Function - Sony FWD-42LX1 Operating Instructions Manual

3
Enter the password again for re-confirmation.
Re-enter new password key.
Be sure to remember this password.
Use : Cancel : Other key
MENU ENTER
The setting is finished when the following
message appears.
INITIAL SETUP/INFORMATION
Language: English
Color System: Auto
Auto Shut Off: Off
Security Lock: On
Information
Security Lock enabled!
Select Set
ENTER
If "Invalid password!" appears on the menu
screen, start the procedure again from Step 1.
INITIAL SETUP/INFORMATION
Language: English
Color System: Auto
Auto Shut Off: Off
Security Lock: Off
Information
Invalid password!
Select Set ENTER
4
After completing the process described above,
turn off the display unit and unplug the power
cord to make the setting valid.
The Security Lock becomes activated and the
dialog box prompting you to enter the password
appears when you turn on the display unit next
time.

Security authentication

Enter the password that is set for the display unit
when the dialog box prompting you to enter the
password appears.
If you enter the wrong password three times, you
cannot operate the display unit any further. In this
situation, press the 1POWER switch to turn off the
display unit.
Exit
MENU
Exit MENU
Setting the Security Lock / Self-diagnosis Function

To deactivate the Security Lock

Press MENU and set "Security Lock" to "Off" in the
INITIAL SETUP/INFORMATION menu.

Self-diagnosis Function

The unit has a self-diagnosis function.
This function shows the display's condition based on
the pattern shown by the flashing of the POWER/
STANDBY indicator. The flashing pattern informs
you of the display's current condition.
If the POWER/STANDBY indicator flashes, check
the number of flashes and contact your authorized
Sony dealer.
1
Check the flashing pattern of the POWER/
STANDBY indicator.
The indicator flashes (with an image showing on
the display) or flashes at intervals of three seconds
(with no image showing on the display).
Count the number of flashes if the indicator
flashes at intervals of three seconds. For example,
the indicator flashes twice, followed by a three
second pause, two more flashes and this pattern
repeats. In this case, the count for the number of
flashes is two.
2
Unplug the unit.
Inform your authorized Sony dealer of the number
of flashes.
39
(GB)