Decals - Snapper 1226 Operator's Manual

Decals
DECALS
This unit has been designed and manufactured to provide
you with the safety and reliability you would expect from an
industry leader in outdoor power equipment.
Although reading this manual and safety instructions it
contains will provide you with the necessary basic knowl-
edge to operate this equipment safely and effectively, we
have placed several safety labels on the unit to remind you
of this important information while you are operating your
unit.
All WARNING, CAUTION, and instructional messages on
your unit should be carefully read and obeyed. Personal
bodily injury can result when these instructions are not fol-
lowed. The information is for your safety and it is important.
The safety decals below are on your unit.
If any of these decals are lost or damaged, replace them at
once. See your local dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the equip-
ment, to follow the safety instructions necessary for safe,
effective, operation,
NOTE: Engine operation and safety decals are supplied by
the engine manufacturer.
DECALS
Model L1228E
Part No. 728183
Important
Over Adjustment
Amputationhazard
............................. I
Part No. 1716532
Auger Danger Decal
Part No. 1733033 - DANGER / WARNING
Main Dash Decal, North American, w/Easy Turn
Part No. 1733057
Discharge Chute
Danger Decal
Part No. 725432
Belt Stretch &
.... Thelubficatior_ points @o_u,i h ere must be lubricated ] i with 30 weight oil every 1011oursof operation and
. . before using the unU after storaqe Failure to hlbricate
in;t_ cause a malfunction d the safety s#telll
Part No. 1733526
Lubrication Decal
Part No. 1733772
Shift Decal
Part No. 1733443
Chute Release