Sharp AQUOS LC-70LE735U Operation Manual page 36

On=Screen Display Menu
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER. Press A/V/4/
I_ to select the position in the category, and then press
ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press
A/V/41/I_ to select the channel you want to delete, and
then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
o Before setting the channel, select the channel you want to
register as a favorite channel.
You can display the "Favorite CH" screen by pressing
FAVORITE OH on the remote control.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
• This function is availablefor DIGITAL(Ai o only.
You can also select a language from the Initial Setup
menu. Select from among 3 languages: English,
French and Spanish.
This selects the optimal audio for the program you are
currently watching even when the TV is mounted to a
wall.
Yes: Selects the optimal audio.
No: No adjustment.
You can assign your favorite applications to the FAV
APP 1,2, and 3 buttons on the remote control. After
assigning an application to a button, you can press
that button to display the top screen of the assigned
application.
Current Setup: Checks the current setting.
APP1/APP2/APP3: You can assign your favorite
applicationsdisplayed on the screen to these buttons.
o For resetting adjustments to the factory preset values,
press A/V to select "Reset", and then press ENTER.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
If you have alreadyset the Secret No., input the 4-digit
secret number here.
The Channel Setup settings will not be changed.
The Language settings will not be changed.
The Secret number settings will not be changed.
The TV Location settings will not be changed.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
iMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 36 to 37):
1. Secret No. is registered.
2. V-Chip/V-Chip (DTV Only) settings have been made.
® The "V-Chip (Dl_/Only)" wi]]only be selectab]ewhen a new
rating system carl be downloaded via digital broadcasting in the
U.S.
3. "Status" is set to "On".
II Setting the Secret No.
You can set and change the secret number by using
0-9.
Yes: Changes or sets the Secret No.
No: The confirmation screen to clear the Secret No.
appears when the Secret No. has been set. When the
Secret No. has not been set, the previous screen will
be displayed.
Secret No, Clear
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On" Enables ParentalCTRL.
Off: DisablesParentalCTRL.
Q- 35