Sharp AQUOS LC-46LE835U Operation Manual page 46

Enjoying 3D image Viewing
6 Press 4/1_ to select the 2D signal type ("Side by
Side" or "Top and Bottom") and then press ENTER.
Example
o If you select the same system as that of the input signal,
2D images are displayed.
• Take off the 3D Glasses and turn off the power.
7 Take off the 3D Glasses and turn off the power.
You can convert normal 2D images into 3D images.
1 Press 3D.
2 Press 4/1_ to select "2D_3D convert", and then
press ENTER.
3 Turn on the 3D Glasses and place them on your
head.
The TV returns to 2D mode after 1 hour has passed.
You can switch back to the previous mode by pressing3D.
1 Press 3D.
o A confirmation screen is displayed.
OO AVMODE VIEWMODE FLASHBACK
r"m _ C:C] E:::3
APPS
A B C D
OOOO
1 Press MENU to display the MENU screen, and then
press 4/_ to select "Picture Settings".
2 Press ,&/V to select a specific adjustment item,
and then press ENTER.
3 Press A/V (or 4/_) to select the desired item,
and then press ENTER.
4 Press MENU to exit.
2 Select "Yes" and then press ENTER.
o The TV returns to the previousmode.
_ APPS
EXl TURN
A B C D
Pressing 31) in 3D mode displays the 3D menu. Press
the colored buttons to make the necessary settings.
A: 3D Brightness Boost
B: 3D Surround (See page 30.)
The surround mode changes each time you press B.
C: 2D_3D Convert Effect (See page 45.)
D: 3D Setup (See page 45.)
Which items can be selected/adjusted differs depending
on whether the TV is in 2D mode or in 3D mode.
The audio and video settings can be changed to suit
the program or input content being watched.
STANDARD(3D}: For a highly defined image in a normal
lighting.
MOVIE{3D}: For a movie.
GAME(3D}: Lowers image brightness for easier viewing.
You can select AV MODE by pressing AV MODE on the
remote control unit.
You can adjust the backlight of the TV for 3D image
viewing.
High/Middle/Low: Select a desired levelof 3D
Brightness Boost.
When "High" or "Low" is selected, "OPC", "Backlight" and
"Range of OPC" are not available.
Q- 44