Sharp AQUOS LC-46LE835U Operation Manual page 33

On=Screen Display Menu
Power control setting allows you to save energy.
Example
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", ,,_/,, appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
"_" appears on the screen.
Off: This function does not work.
POWER
OPTION SLEEP SAVING FREEZE
C:3 E::3 C::3
[Z] B
APPS
o "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
--If you set "OPC" to "On" when "Power Saving" is set to
"Standard", then the "Power Saving" setting will change
to "Advanced".
--When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
--"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture Settings menu screen.
You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 23.)
o "Power Saving" is not available when the TV is in 3D mode.
1 Press MENU to display the MENU screen, and then
press 41/1_ to select "Power Control".
2 Press A/V to select a specific adjustment item,
and then press ENTER.
3 Press A/T (or 4t/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
• Skip this step for "Audio Only".
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On. Audio is output without screen image.
Off: Both screen images and audio are output.
The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
This function allows the TV to automatically shut the
power down when there is no signal received.
Enable: The power will automatically shut down if there is
no signal for 15 minutes.
Disable: This function does not work.
When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
When a TV program finishes, this function may not operate.
This function allows the TV to automatically shut the
power down when there is no operation.
Enable: The power will automatically shut down if there is
no operation for 3 hours.
Disable: This function does not work.
When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
Q- 31