Tv (Front) - Sharp AQUOS LC-46LE835U Operation Manual

QUICK REFERENCE
m LC-46LE835U/LC=52LE835U
2
Confirm that there are 9 screws (4 long screws, 4
middle screws and 1 short screw) supplied with the
stand unit.
Attach the supporting post for the stand unit onto
the base as shown below.
. The supporting post attachesto the baseat an off-
centered location on the base. Be sureto attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward. (_)
tt F_ _q_----i Long ......
3 Insert the stand into the openings on the rear of the
TV.
Soft c_
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
Middle screws
5 (i._ Insert the stand cover.
(2} Insert the screw to secure the stand cover.
Short screw _
• To detach the stand, perforn_the steps in reverse
order•
m LC-60LE835U
2
Confirm that there are 10 screws (4 long screws, 4
middle screws and 2 short screws) supplied with the
stand unit.
Attach the supporting post for the stand unit onto
the base as shown below.
. The supporting post attachesto the baseat an off-
centered location on the base. Be sureto attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
@
_1 t t _------ Long ......
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
_ Middle screws
Insert the stand into the openings on the rear of the _
3
f_
5 (i,_ Insert the stand cover.
(2} Insert the 2 screws to secure the stand cover.
Short screws _i_ @
• To detach the stand, perforn_the steps in reverse
Q-9