Direct Button Operation; Mute; Sleep Timer; Flashback - Sharp AQUOS LC-46LE835U Operation Manual

Direct Button Operation
POWER
OPTION SLEEP SAVING FREEZE
CC AVMODE VIEWMODE FLASHBACK
APPS
Mutes the current sound output.
Press MUTE.
= "C_)" will be displayed on the screen for 30 minutes,and
the sound is silenced.
o Within 30 minutes of pressing MUTE, mute can be
canceled by pressing VOL+/- or MUTE,
Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
You can change channels in several ways.
Method 1
Using CH/X/V on the remote control unit or on the TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g.,Channem 5):
Press5 _ ENT.
To select a 3-digit channem number (e. g., Channem 115}:
Pressl_l_5_ENT.
To select a 4-digit channel number (e.g., Channel 22.1):
Press2 _ 2 _ _ (DOT} _ 1 _ENT.
Method 3
Selecting the program from Channel list.
1 Press iNPUT on the remote control unit.
o The INPUT list displays.
2 Press 4/_- to select "AIR" or "CABLE".
The Channel list displays.
3 Press A/T to select the desired channel, and then
press ENTER.
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
= Theremainingtime displays when the sleep timerhas beenset.
= Each time you press SLEEP, the remaining time switches
as shown below.
Off ,m 30 ,=, 60 _ 90 _ 120
t I
= When set, the time automatically starts counting down.
= If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
= When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
= Select "Off" by pressing SLEEP to cancel the sleep timer.
= The TV will enter standby when the remaining time reaches 0
Press FLASHBACK to switch to the previously tuned
channel.
Press FLASHBACK againto switch backtothe currently
tuned channel.
= When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
= When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
= If you push "0" by itself, nothing will happen.
= Complete the above steps within a few seconds.
= When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.
A moving image is captured.
Press FREEZE againto cancel the function.
You can change the volume by pressing VOL+/- on
the TV or on the remote control unit.
= To increasethe volume, press VOL+.
= To decrease the volume, press VOL-.
Audio status
= When this function is not available, "No displaying still
image available." will display.
= The still image automatically goes out after 30 minutes.
= If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
o You can have the same settings by choosing "Freeze" on
the menu items. (See page 32.)
Speaker Variable sound Mute
= When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
= See page 33 for details on the Output Select function.
(D- 22