Sharp AQUOS LC-46LE835U Operation Manual page 43

On=Screen Display Menu
3 Press ENTER to start checking the data in the USB
memory device.
5 To update the TV software with the update file,
select "Yes", and then press ENTER.
4 During the data checking, "Checking" blinks.
!!
Example
The current version of the TV software and the version
of the update file on the USB memory device are
displayed.
Example
If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
6 When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
If the update has failed, check the file in the USB
memory device and try Software Update again.
7 After the screen shown below is displayed, press
ENTER.
8 Remove the USB memory device.
Q- 41