Input Label - Sharp AQUOS LC-37D43U Operation Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT FLASHBACK
©0
FREEZE MENU
© @
Press iNPUT to select the desired input
source.
Press MENU to display the MENU screen, and
then press _11/_ to select "Setup".
Press A/Y to select "Input Label", and then
press ENTER.
Press A/T/_/_ to select the new name for
the input mode, and then press ENTER.
Example
Allows you to set a time when the TV automatically
switches to standby.
FAVO I
®®®s91
Press SLEEP.
,, The remaining time displays when the sbep timer
has been set.
I Sleep Timer: Remaining 30 •
Each time you press SLEEP, the remaining
time switches as shown below.
,, When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
s0 I-I G0 I
Lr q- J
,, Select "Off" by pressing SLEEP to cancel the sleep timer.
,, The TV will enter the standby mode when the remaining
time reaches zero.
,, When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
,, You cannot change labels if the INPUT SOURCE is TV.
Q- 33