Resetting The Picture Settings To The Factory Defaults - Samsung PN50A400C2DXZA User Manual

Preventing_ Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology.
This technology enables you to set picture movement up/down (Vertical Line) and
side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture
in minutes.
1 Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 26)
2 Press the A or _' button to select Screen Burn Protection, then press the
ENTER button.
Press the ENTER button to select Pi×el Shift, then press the ENTER button.
Pressing the A or T button will alternate between On and Off.
You will also see the items Horizontal Dot, Vertical Line and Time.
• Pixel Shift: Usingthis functionl Youcan minutely mevepixe!s on the PDP in the
horizonta!or verticaldirectionto preventafter-imageson the screen.
Press the A or T" button to select the item you wish to change, then press the
ENTER button.
Press the ,t, or V' button to change the value of the item, then press the ENTER
button.
• Optimum condition for pixel shift;
...................................... TV/AV1/Component/HDMI
2
Press the EXIT button to exit.
_" This function is not available in the Just Scan mode.
Resetting the Picture Settings to the Factory Defaults
To select the desired picture mode, follow the Activating Picture Options
instructions number 1. (see page 26)
Press the At,or T button to select Reset, then press the ENTER button.
Press the 41or _ button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
Each mode can be reset.