Remote Control Buttons You can use the remote control up to a distance of about 23 feet from the TV. POWER Turns the TV on and off. Selects the TV mode directly. 3 NUMERIC BUTTONS Press to directly select a channel. 4 –...
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI Connecting to HDMI (High Definition Multimedia Interface) DVD Player or Cable Box / Satellite receiver (Set-Top Box) HDMI Cable (Not supplied) Connecting to DVI (Digital Visual Interface) DVD Player or Cable Box / Satellite receiver (Set-Top Box) Audio Cable (Not supplied)
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) Connecting to Y, P DVD Player or Cable Box/ Satellite receiver (Set-Top Box) Audio Cable (Not supplied) Component Cable (Not supplied) Connecting a Camcorder Video Cable (Not supplied) Audio Cable (Not supplied) Camcorder TV Rear Panel...
Connecting a VCR VCR Rear Panel Audio Cable (Not supplied) Video Cable (Not supplied) Antenna Cable (Not supplied) ➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV.
Connecting a Digital Audio System Digital Audio System Optical Cable (Not supplied) ➢ What is OPTICAL? • Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital audio in the form of a light wave that uses a glass conductor. ➢...
Connecting a PC Using the D-Sub Cable PC Audio Cable (Not supplied) D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 3.5 mm Stereo plug to 2 RCA Cable (Not supplied) HDMI/DVI Cable (Not supplied) ➢ Each PC has a different back panel configuration. ➢...
Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while for the picture to appear. Viewing the Menus With the power on, press the MENU button. The main menu appears on the screen.
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ▲ or ▼ to select the correct analog signal cable system source from among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ENTER button to select Mode. Press the ▲...
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Poor picture quality. Poor sound quality. No picture or sound.
Page 12
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service...
Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park (New Jersey) 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga (Ontario) L5R 4B2 Centre d’appel – heures de service (du lundi au dimanche, de 9 h à 12 h (HNE)) www.samsung.com/global/register.
Touches de la télécommande La télécommande peut être utilisée jusqu’à une distance d’environ 7 mètres (23 pieds) du téléviseur. POWER Permet d’allumer et d’éteindre le téléviseur. Pour sélectionner directement le mode TV. 3 TOUCHES NUMÉRIQUES Sélectionner directement un canal. 4 – Appuyer sur cette touche pour choisir des canaux W.LINK...
Page 15
Branchement d’un lecteur DVD ou d'un câblosélecteur ou récepteur (décodeur) Raccordement aux prises HDMI (High Definition Multimedia Interface) Lecteur DVD ou câblosélecteur/ Récepteur (décodeur) Câble HDMI (non fourni) Connexion à l'entrée d'interface vidéo numérique (DVI) Lecteur DVD ou câblosélecteur/ Récepteur (décodeur) CâbleAudio (non fourni) Câble HDMI/DVI(non fourni) Panneau arrière du téléviseur...
Branchement d’un lecteur DVD ou d'un câblosélecteur ou récepteur (décodeur) Branchement à Y, PB, PR Lecteur DVD ou câblosélecteur/ Récepteur (décodeur) Câble Audio (non fourni) Câble de composant(non fourni) Branchement d’un caméscope Câble vidéo (non fourni) Câble Audio (non fourni) Caméscope Panneau arrière du téléviseur Panneau arrière du téléviseur...
Branchement d’un magnétoscope Panneau arrière du magnétoscope Câble audio (non fourni) Câble vidéo (non fourni) Câble d’antenne (non fourni) ➢ Si le magnétoscope est un modèle “mono” (non stéréo), relier les prises d’entrée audio droite et gauche du téléviseur au moyen d’ un connecteur en Y (non fourni).
Branchement d’un système audionumérique Système audionumérique Câble optique (non fourni) ➢ Que signifie OPTIQUE? • Un câble optique convertit un signal électrique en un signal lumineux optique et le transmet par des fibres de verre. Un système transmet des signaux audionumériques sous forme d’ondes lumineuses, le format S/PDIF, par le biais d’un conducteur en verre. ➢...
Branchement d’un ordinateur À l’aide du câble D-Sub CâbleAudio (non fourni) Câble D-Sub (non fourni) À l’aide du câble HDMI/DVI Câble pourvu d’une fiche stéréo de 3,5 mm et de deux fiches RCA (non fourni) Câble HDMI/DVI (non fourni) ➢ La configuration du panneau arrière de chaque ordinateur est différente.
Mise sous tension/hors tension du téléviseur Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while for the picture to appear. Affichage des paramètres et menus With the power on, press the MENU button.
Au moment de la sélection du système de télévision par câble : Appuyer sur ENTER pour amorcer la programmation automatique. Appuyer sur les touches ▲ ou ▼ pour choisir la source du signal analogique appropriée (STD, HRC ou IRC), puis sur ENTER. Si le câble est numérique, sélectionner la source de signal pour une diffusion analogique et numérique.
Réglage de l’image Changement du format normal de l'image Il est possible de choisir le type d’image qui correspond le plus à ses exigences. Appuyer sur la touche MENU pour afficher le menu. Appuyer sur la touche ▲ ou ▼ pour sélectionner Picture, suivie de la touche ENTER.
Si le téléviseur semble éprouver un problème, consulter d’abord cette liste des problèmes et solutions possibles. Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le service à la clientèle de Samsung en composant le -800-SAMSUNG.
Page 24
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.