Maintenance - Samsung HMX-S10BN User Manual

MAINTENANCE
Your camcorder is a product of superior design and craftsmanship and should be treated with
care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy
this product for many years.
• For safekeeping, turn off the camcorder.
Remove the battery and AC power adaptor. "-,pages 20, 21
Remow_ the memory card. "-,page 32
• Do not push the LCD screen too hard or strike it with anything.
• When using the camcorder in cold conditions, afterimage may appear on the LCD screen. This is not a
malfunction.
• If you leave the power on for a long time, the surface around the LCD screen becomes hot.
• An LCD screen is manulactured using advanced technology which creates screens with pixel failure rates
of less than 0.01%. However, a black or bright spot (red, blue, whke) may appear in the center of the LCD
screen and up to two spots may appear outside the center. These spots, which are normally incurred
during the manufacturing process, do not affect the recorded images.
- Use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with cloth or your
fingers.
- When the lens gets frosty, turn the power off and leave it off for approximately an hour. When the
temperature of the lens is similar to the ambient temperature, the frost will disappear.
• Use the camcorder only after dew condensation has completely disappeared.
• Be sure to use the recommended accessories supplied with the camcorder. For service, contact
your nearest Samsung authorized service center.
151