Samsung LN40A540 User Manual page 26

>-When Double ([_,
r-m ) mode has been set in PIP, the Picture Size cannot be set.
>- Temporary image retention may occur when viewing a static image on the set for more than two hours.
>_ After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the 4 or I_ button to select "Position", then press the ENTER
button. Press the A or T button to move the picture up and down.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
button. You can initialize the setting.
> After selecting "Just Scan" in HDMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the 4 or I_ button to select "Position", then press the ENTER
button. Press the A, _', _ or _- button to move the picture.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
button. You can initialize the setting.
>- HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
>- Settings can be adjusted and stored for each external device you have connected to an input of the TV.
ATV, Video, S-Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Just Scan
.... Pc
(_ Alternately, you can press the RSIZE button on the remote control repeatedly
to change the picture size.
Zooml € Move
16:9_ Zoom 1 Zoom2
Sets the picture to 16:9 wide mode. Magnifies the size of the picture on
the screen.
Wide Fi_ 4:.33 Just Scan
Enlarges the aspect ratio of the
Magnifies the size of the picture more
than "Zoom1 ".
Sets the picture to 4:3 normal mode. Use the function to see the ful
picture to fit the entire screen image without any cutoffwhen HDM
(720pt1080i11080p), Component
(1080i/1080p) or DTV (1080i) signals
are input.