Viewing A Photo Or Slide Show - Samsung LN40A540 User Manual

Viewing a Photo or Slide Show
Viewing a Slide Show
1. Press the W.LINK button on the remote control to display the "WISELINK"
menu.
2. Press the 41or !_ button to move to "Photo", then press the ENTER
button.
>- Photo files are displayed.
3. Press the 41or _,- button to select the desired photo in the Photo list.
4. Pressthe TOOLS button.
5. Press the J, or 'V button to select "Slide Show", then press the
ENTER _ button.
>- All files in the photo list will be used for the Slide Show.
>- During the slide show, files are displayed in order from the currently
shown file.
>- The Slide Show progresses in the order sorted in the Photo list.
>- Music files can be automatically played during the Slide Show if the
"Background Music" is set to "On".
(Refer to page 70).
(_ While a photo list is displayed, press the [_ (Play) / ENTER
button on the remote control to start slide show.
To perform a 81ideShow with only the selected files
1. Press the 41or !_ button to select the desired photo in the Photo list.
Then press the yellow button. Repeat the above operation to select multiple photos.
>- The V' mark appears to the left of the selected photo.
>- If you select one file, the SlideShow will not be performed.
2. Press the _ (Play) / ENTER _ button.
>- The selected files will be used for the Slide Show.
>- If you have selected files, only the selected files will be used for the Slide Show.
Playing current group
1. Press the A or _" button to select a sorting standard.
("Monthly", "Timeline", "Color", "Composition", "Folder", "Preference")
2. Press the _ or _,- button to select the desired photo in the Photo list.
>- To move to the previous / next group, press the _ (REW) or
(FF) button.
3. Press the TOOLS button.
4. Press the _, or T button to select "Play Current Group", then press the
ENTER _ button. Only the photos in the sorting group including the
selected files will be used for the Slide Show.
5. To exit "WISELINK" mode, press the W.UNK button on the remote control.
Slide show function information icon (Displayed at the top left of the screen)
..... Current OSD _ Function
I_ (Photo) SlideShow Photo Slide Show is in progress.
You can pause a Slide Show by pressing the [_ (Pause)/ENTER C_ button
on the remote control during a Slide Show.
I| Photo Pause
To resume the Slide Show, press the 1_ (Play)/ENTER CM button on the
remote control again.