Eureka HP5500 Series Owner's Manual page 4

Step C Replace Bag Cover
NOTE: Make sure bag is properly installed.
Check to see bag has not shifted away
from bag inlet during shipping. See
page 13 for further instructions.
Bag Cover
Latch
Tabs
4. Replace front cover by aligning tabs at bottom of
front cover into groove on cleaner. Pivot front cover
up against cleaner and rotate the bag cover latch
to the right to secure.
Step E Store Electrical Cord
5
Cord
Retainer
4
Bag Inlet
Groove
6
Cord
Hook
6
Cord
Hook
Step D Store Accessories
Dusting/
Upholstery
Brush
Crevice
Tool
5. You will find your cord retainer on the handle above
the upper cord hook. Firmly push the electrical cord
down into the cord retainer. This will place the cord
out of the way the next time you vacuum.
6. Next wind the cord around the two cord hooks on
the back of the cleaner.
7. Secure the plug to the cord to prevent unwinding.
Nesting
Extension
Wands