Eureka HP5500 Series Owner's Manual page 3

How To Assemble
CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION: Moving parts, stay clear of brush roll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Remove Bag Cover
Bag Cover
Handle
Bag Cover
1. Remove bag cover from unit to expose the two
screw installation locations. Release the bag cover
by rotating the bag cover latch to the left. Pull out
and up on the bag cover handle to remove bag cover
from unit.
Bag
Cover
Latch
Two Screw Locations
Step B Attach Handle
NOTE: Screws must be installed to properly
secure the handle.
Handle
Tabs
Sc rew
2. Position handle as above. Slide the handle down
over the top of the unit, inserting handle tabs into
slots on unit.
3. Find the two screws in the accessory bag included
in the carton. To secure the handle on the unit,
install the two screws.
Slots
Sc rew
3