Connectors; Interface Connectors; Drawer Kick-Out Connector (Modular Connector) - Epson TM-U220A Specification

Confidential

2.3 Connectors

2.3.1 Interface connectors

See Section 2.1, Interfaces.

2.3.2 Drawer kick-out connector (Modular connector)

The pulse specified by the ESC p or DLE DC4 is output to this connector. The host PC can confirm
the status of the input signal by using the DLE EOT , GS a , or GS r commands.
1) Pin assignments
+24 V is output through pin 4 when the power is turned on. However, pin 4 must be used only for
the drawer.
Table 2.3.1 Drawer Kick-out Connector Pin Assignments
2) Connector model:
EPSON
Figure 2.3.1 Panel Diagram
1
Figure 2.3.2 Drawer Kick-out Connector
Pin No. Signal Name
1 Frame GND
2 Drawer kick-out drive signal 1
3 Drawer open/close signal
4 +24 V
5 Drawer kick-out drive signal 2
6 Signal GND
Printer side:
User side:
TITLE
TM-U220A
Specification
(For Argentina Fiscal)
6
Direction
--
Output
Input
--
Output
--
DDK 285D-7660J-100 or the equivalent
6-position 6-contact (RJ12 telephone jack)
SHEET
REVISION
A
NO.
NEXT SHEET
12 11