Table of Contents
Advertisement
Connections
Setup
TV + HD Receiver + VCR + DVD Player
I.
Make sure cable or antenna
andJor satellite
is connected to your VCR.
A. Connect the coaxial cable from your cable outlet
or antenna to the antenna
input on the HD Receiver.
B. Connect the satellite dish antenna to the satellite input
on the HD Receiver.
2.
Connect your
HD Receiver to your'IV.
A. Connect the audio (white and red) cables to the CMPI L/MONO
and R audio jacks on the back of the TV and to the Audio Output jacks
on the HD Receiver.
B. Connect three video grade cables to the CMP I Y, Ps, P_ jacks on the back of the TV and to the Y, P_, PRjacks on the HD Receiver.
Notes: TheY,P_P_jacksare sending the digital cablesignal to the IV
If your HD Receiverhas a DVIoutput; connect the HD Receiverto your 1Vusing a DVIcable.Make sure to connect the left and dght audio cables to rile DVIL/MONOand Rjacks
on the iV
3.
Connect
your HD Receiver
to your VCR.
A. Connect a coaxial cable to the HD Receiver's antenna
output
and to VCR's antenna
input.
B. Connect the audio (white and red) cables to the Audio Output jacks on the HD Receiver and to the Audio Input jacks on the VCR.
C. Connect
the video
cable to the Video Output
jack on the HD Receiver
and to the Video Input jack on the VCR.
4.
Connect
your VCR to your TV.
A. Connect
a coaxial
cable to the VCR's antenna
output
and to the ANTENNA/CABLE
lnput
jack on the TV.
B. Connect
the audio (white and red) cables
to the VID2 LfMONO and R audio jacks on the back of the TV and to the Audio Output
jacks
on
the VCR.
C. Connect
the video
cable to the V1D2 V (video) jack on the back of the TV and to the Video Output
jack on the VCR.
5.
Connect
your
DVD player to your
"IV.
A. Connect
the audio
(white and red) cables
to the CMP2 L/MONO
and R audio jacks
on the back of the TV and to the Audio Output
jacks
on the DVD player.
B. Connect
three video
grade
cables
to the CMP2 Y, P_, P_ jacks on the back of the TV and to the Y, P_, PRjacks
on the DVD player.
No tes: If your DVDplayer doesn't have Y,P_, PRjaeks, but does have an S-Videojock, connect the player to the Iv's VID1S- VIDEO jack _lsing an S-Video cable
If your DVDplayer doesn't havean S-Videojack, connect the player to the W's VID1 V[video/jack using a video cable.
Importanz: If you usethe Iv's VID1S-VIDEO or V[videoJjack to connect the DVDplayer, you must connect the audio cables to the IV's VID1L/MONOend Rjack£
Go to page 12
6
Graphics contained within this publication are for representation
only.
Chapter
1
Advertisement
Table of Contents
