Table of Contents
Advertisement
Connections 8: Setup
Set the Menu
Language
The first part of the setup allows you to select your preferred language
For the menu system.
I.
Highlight your preferred language
|br the menu system using the arrow buttons.
2. Press OK to select that language
(the Channel Setup screen appears with Autochannel
search highlighted).
Complete Auto Channel Search
This part of the setup allows the TV to search |br all channels viewable through your antenna
or cable TV system. This is sometimes called auto programming. Press OK to begin auto
channel search. When the channel search is complete, you can either press OK to access the
List PcLabels screen or CLEARto view TV.
Note for models D40W20 and D52 W20: If you press CLEAR the Auto Convergence screen appears.
Changing Lists and Labels
The List _ Labels part of the setup lets you edit your channel list and choose or create a
personal six-character label For each channel.
Note:Changing List and Labelscan be time consuming. Youcan change theseat o ]atar time by accessingthe
Setup menu.
1.
Press the left or right arrow to scroll through
the available
channels
and choose
the
channel
you want
to edit.
2.
Press the down
arrow to highlight
the In channe!
list option.
Press the le|l or fight arrow
button
to add (the box is checked)
or remove
(the box is unchecked)
the channel
from
the
list.
3.
Press the down
arrow to highlight
the Channellabel
option.
Press the left or right arrow
button
to scroll through
the available
list of 25 most
common
labels. The last option
in
the list allows you to create your own six-character
label For the channel
(the first letter
oF
the label is highlighted).
4.
Press the
1 or 2 number
button
to change
the first letter
of the label.
5. Press the right arrow to highlight the second letter, then press the I or 2 number button
to change the second letter, etc...
6. When you are finished creating your label, press OK. For model D34W20, your TV tunes to
the last channel available in your channel list. For models D4OW20 and D52W20 only, the
Auto Convergence menu appears next.
Auto
Convergence
(for models D40W20
and D52W20
only)
Your TV's picture tubes might have been disturbed during delivery or after you moved the TV,
causing the color in your TV to be out of alignment. The colors adjust by starting auto
convergence.
1. Press OK to begin auto convergence.
2. When the auto convergence is complete, the Redcenter convergence menu appears. The
cross in the middle of the screen should be yellow. If it is not, use the arrow buttons
to
move the red cross to overlap the green cross. Press OK when adjustments
are complete.
3. The Blue center convergence menu appears with a eyan cross in the middle of the screen. If
it is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK
(the TV tunes to the last available channel in the channel list).
1 2
Graphics contained within this publication are For representation
only.
Chapter
1
Advertisement
Table of Contents
