Installation; Included Files; Running Elodemo; Command Line Flags - Elo TouchSystems software Driver Manual

18 Chapter 3 - DOS Demonstration Program
I
NSTALLATION
ELODEMO is installed with the INSTALL program on the DOS and Windows
Driver Disk by choosing

Installation

choose
ELODEMO with
ELODEMO requires a 286 computer or better with VGA graphics, approximately
400K of available RAM, and 1.7 Mbytes of hard disk space.

Included Files

The following files are typically installed in the \TOUCH directory:
ELODEMO.EXE
*.PIC,*.IMG
*.BGI
To delete the demonstration program from your hard disk after you have run it,
see Uninstalling the Software, page 14.
R ELODEMO
UNNING
To run ELODEMO, type:
typically from the \TOUCH directory. The main menu is shown in Figure 3-1.

Command Line Flags

Several flags are available when running ELODEMO.
To prevent the main menu from timing out to the DOS prompt after one minute of
no activity, type:
This flag is especially useful at trade shows. To exit, you must either press the
[Esc] key or touch the secret button (extreme lower-left corner of the screen), then
touch the normal "Stop Demo" button.
. To conserve disk space, ELODEMO is not installed if you
Windows Express Installation
Selective Installation
Demo program.
Screen images used by ELODEMO.EXE.
Video driver used by ELODEMO.EXE.
ELODEMO [Enter]
ELODEMO -x
DOS Express Installation
. You may choose later to install
.
or
Selective